86-512-58601098,86-512-58601108
Leyu Economic Development Zone, Zhangjiagang, Suzhou, Jiangsu, China
LIANSHUN MACHINERY PVC PIPE PRODUCTION LINE
Unique screw design, residence time of material in the machine barrel is short.Mixing, plasticizing , high-quality gearbox, beautiful appearance, smooth running, low noise, barrel copper finned ceramic heaters, air-cooled system, with heating, cooling effect is good.
Precise temperature control, vacuum exhaust system, can exclude the materials in the water and volatile gas, improve the quality of products, the main motor adopts DC governor or controlled inverter, click on the output torque stable, stepless.This is suitable for heat-sensitive material processing powder pvc.
The production line is mainly used in the production of PVC pipe,The producing line was adjusted according to different countries' conditions and imporived them at a hign level producing quality.
At the same time the line can be at a high capacity and easy to maintain.
Equipment composition
1. Powder feeder: It is made of high quality stainless steel. It has the characteristics of high pressure and corrosion resistance. It can transport PVC powder well.
2. Conical twin screw extruder: It is equipped with a mandatory quantitative feeding system, automatic temperature control system, vacuum exhaust system and automatic speed control system to ensure accurate control of the material temperature and plasticization of the stability.
3. PVC pipe mold: Mold material is 45 # quenched and tempered steel by forging processing and surface polishing. Due to the low melt pressure, it can keep the low melt temperature in high extrusion.
4. Vacuum calibration tank: Due to the high hardness and high quality stainless steel plate manufacturing, thetank is resistant to high pressure and corrosion resistance.
5. Hauling machine: It adopts frequency control mode. The traction frame using the chain of sub-moving to ensure that the traction speed of the same, flexible pneumatic compression, bearing with Block-aligning structure, can effectively reduce the installation error. It uses V-type high friction coefficient rubber block.
6. Cutting machine: It uses the form of lift knife cutting. This cutting method is simple and effective. It has the characteristics of fast speed, low failure rate, and significant cost savings.
7. Stacker: The pipe can be placed on the top of its.
8. Control system of the production line: Customers can choose Germany's Siemens PLC control system. It’s intelligent. The customer can also choose common control. It uses Siemens electrical parts and Japan Omron temperature control table. Its control is simple and easy to operate.
| Main Technical Parameters | ||||||
| MODEL | PVCG-110 | PVCG-160 | PVCG-250 | PVCG-315 | PVCG-400 | PVCG-630 |
| MATCHED EXTRUDER | SJZ51/105 | SJZ65/132 | SJZ65/132 | SJZ80/156 | SJZ80/156 | SJG92/188 |
| OD RANGE(mm) | 20-110 | 50-160 | 75- 250 | 110-315 | 200-400 | 315-630 |
| LENGTH OF VACUUM CALIBRATOR TANK(mm) | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 |
| HAUL SPEED(m/min) | 0.6-6 | 0.5-5 | 0.4-4 | 0.3-3 | 0.2-2.5 | 0.2-1.5 |
| INSTALLED POWER(kw) | 67 | 85 | 95 | 125 | 135 | 255 |
| TOTAL LENGTH9(mm) | 17000 | 18000 | 20000 | 20500 | 28000 | 30000 |
Final Product
Jiangsu Lian Shun Machinery Co., Ltd.keeps in mind "science and technology as the forerunner, innovates strives for the development, to the quality of survival, in good faith to be customers" as its Entrepreneurial spirit, To implement the "people- Oriented, technology leading, customer first "business philosophy since its establishment, Vast sea, a thousand boats compete.Confident make us more confidence In this competition and development with the opportunities and challenges of the environment, Let us learn to hard and unremitting pursuit, Business made these two points, it took root in the bussiness shines with people and wisdom in life and work, it makes our partners more confident to Embrace the future like us.This is our wealth, it is also our value .But also our power and faith to provide customers with every quality service.
Before sale:
Act according to actual circumstances
According to the definite needs, we make the proposal to achieve the clients' utmost requirement, and offer the most perfect, economic and suitable project.
On sale:
Communicate with clients.
Prepare heartily, from marking and technical communicating to training and tutorship, we will communicate with clients, learn each other, and totally understand clients' requirement,
After sale:
Our target: We are going to do our best to consummate the after service no matter how much we pay. "The clients' total satisfaction" is our only standard.
Why choose us:
1. Low cost : all the machine ,we make it ourself to reduce the cost of our customer.
2. Genuine product with excellent quality : we choose our material very strict, all the material come to our factory must pass the quality test substandard goods are returned to the supplier.
3. Engerneers available to serve oversea:
4. Quick delivery: the company provide just in time delivery with its streamlined supply chain
5. Cost saving we take strong attention to every detail in the manufacturing process,the quality control in our factory is very strict, all defective semi-manufactures must be treated again or reject. all the machine must be checked out ,then deivered to our customer. all about that pushing up the price, what we want to do is give our customer a good quality product with stable working and long lived.
